4 – 41
Press the (ENTER) key to display the wear-rate setting submenu, and then press the (NEXT) or
(PREV.) key until the following menu is displayed.
Press the (ENTER) key to display the wear-rate clear menu.
The number to the right of “CLEAR GROUP” is the group number. Use the or key to increase or
decrease the group number, and press the or key to select “YES” or “NO.” Select “YES” for the
group number to be cleared, and press the (ENTER) key to clear the total distance. To cancel the
selection(s), press the (NEXT) or (PREV.) key.
Press the (PAUSE) key to cancel PAUSE mode.
Step
3
Step
4
Step
5
Step
6
CLEAR GROUP
CLEAR GROUP1<YES>
To Next Page
Loading...
