GRAPHTEC CE6000 SERIES - Loading Sheet Media

7
7 Release the lock from the media stopper (Pull the sides and slide it forward).
Release
the media
stopper
Media stopper
Supplement
Dirt from the oor may stick to the media when
giving it slack, so please be careful.
8 When the set lever is up (and the media is held down by the push rollers)
and the media stopper is unlocked, pull out the roll media and give it
slack.
Give it slack
Create the same amount of slack in the media as will be used for the
back of the machine.
When using the roll media tray
Create the same amount of slack in the media
as will be used for the back of the machine.
Step 1: Raise the set lever
and x the media.
Step 2: Create slack.
Give it slack
Loading Sheet Media
Supplement
See "Aligning the Push Rollers" about the
position of the push rollers.
1 Lower the media set lever to raise the push rollers.
Media sensor
Push roller
Media set lever