EasyManua.ls Logo

GRAPHTEC FC7000-160 - Troubleshooting; The Plotter is Turned On But Doesn’t Operate; Media Loading Operations

GRAPHTEC FC7000-160
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FC7000-UM-251-9370 6-6
6. DISASSEMBLY AND REASSEMBLY
6.1.6 How to Replace the Rear Writing Panel
How to detach the rear writing panel
(1) Detach the rear guide (see Subsection 6.1.5).
(2) Remove the M3L6 binding head screw from the top of the rear writing panel.
(3) Remove the five M3L6 binding head screws from the rear of the rear writing panel for the FC7000-75.
(Remove the five M3L6 binding head screws from the rear of the rear writing panel for the FC7000-100.
Remove the six M3L6 binding head screws from the rear of the rear writing panel for the FC7000-130.
Remove the seven M3L6 binding head screws from the rear of the rear writing panel for the
FC7000-160.)
(4) Detach the rear writing panel.
Rear writing panel
M3L6 binding head screw
M3L6 binding head screw
How to reinstall the rear writing panel
(1) Reattach the rear writing panel in the reverse order in which it was detached.

Table of Contents

Related product manuals