GRAPHTEC FC7000-160 - How to Replace the Cutting Mat

FC7000-UM-251-9370 6-27
6. DISASSEMBLY AND REASSEMBLY
6.2.15 How to Replace the Cutting Mat
How to detach the cutting mat
(1) Peel off the cutting mat from the cutting mat base.
How to reinstall the cutting mat
(1) Clean the surface of the cutting mat base with alcohol where the cutting mat was attached.
(2) Attach the new cutting mat to the cutting mat base.
(3) Make sure that there is no air between the cutting mat and the cutting mat base.