GRAPHTEC FC7000-160 - Block Diagrams and Circuit Diagrams; Block Diagrams; Circuit Diagrams

FC7000-UM-251-9370 6-20
6. DISASSEMBLY AND REASSEMBLY
6.2.9 How to Replace the Cam Sensor
How to detach the cam sensor
(1) Detach the right side cover (see Subsection 6.1.1).
(2) Disconnect the cable from the cam sensor.
M3L6 binding head screw
Cam sensor
(3) Remove the M3L6 binding head screw attaching the cam sensor.
How to reinstall the cam sensor
(1) Reattach the cam sensor in the reverse order in which it was detached.