GRAPHTEC FC7000-160 - How to Enter the Adjustment Menu

FC7000-UM-251-9370 7-14
7. ADJUSTMENT
7.3.6 How to Enter the Adjustment Menu
(1) Turn on the power while pressing the TEST and ENTER keys.
Or
After turning on the power, press the TEST key and the ENTER key simultaneously within 2 seconds.
(2) Load a sheet of paper in the plotter.
(3) The plotter displays the menu shown below.
CONDITION 1 12
20
READY 4
PEN
(4) Press the MENU key to display the menu shown below.
SENSOR TEST
KEY TEST
PEN FORCE
XY GAIN