Tool carriage
The Cutter plunger is mounted on the Tool carriage
during use. The Cutter blade is mounted on the Cutter
plunger.
Blade length adjustment knob
Adjust the blade
length by turning
the Blade length
adjustment knob.
Cutter plunger
Paper
Adjust the blade length to such a
degree that the trace of blade can
be made on the backing sheet.
Backing sheet
Plotting pen (Water-based fi ber pen)
Using the plotting pen instead of a cutter
allows the drawing and illustration to be
generated.
Use it for testing before cutting.
Media
The media includes the fi lm, paper and etc. Select it depending on the application.
Paper (Roll media)
Drawing and illustration
using the PEN
Pattern paper
cutting out the cut line
Marking fi lm
Sticker
using the Cutter
[STRUCTURE OF MARKING FILM]
Marking
fi l m
Paste
Backing sheet
*To avoid bodily injury, handle cutter blades with care.
To Next Page
Loading...
