GRASS VALLEY K2 - Level 35 Redundant K2 SAN

03 September 2009 K2 Storage Cabling Guide 19
Level 35 Redundant K2 SAN
Level 35 Redundant K2 SAN
This manual documents the default GigE switch configuration. Other configurations are available,
depending on your port count and FTP bandwidth requirements. Refer to the K2 Storage System
Instruction Manual or the K2 SAN Installation and Configuration Guide for more information.
To cable this K2 SAN
device…
Of this model or
platform…
Turn to these instructions:
K2 client K2 Media Client,
including SDA-00,
SD-00, and HD-00.
“K2 Media Client for redundant K2 SAN” on page 25
K2 Summit
Production Client
“K2 Summit Production Client for redundant K2 SAN” on
page 26
Gigabit Ethernet Switch HP 2900 series “2900 HP GigE switch for redundant K2 SAN” on page 30
K2 Media Server Dell 1950 “Dell 1950 GS for Level 35 redundant K2 SAN” on page 37
Dell R610 “Dell R610 GS for Level 35 redundant K2 SAN” on page 44
NH1-10GE K2 Media
Server (optional)
Dell 1950 “Dell 1950 NH1-10GE for online K2 SAN” on page 49
Dell R610 “Dell R610 NH1-10GE for online K2 SAN” on page 50
K2 RAID Level 35 K2 RAID “K2 RAID for Level 35 redundant K2 SAN” on page 64
NH1-10GE
Server (optional)
K2 MEDIA SERVER
Con
tr
o
l
FTP
Fibre Channel
Fibre Channel
L30 RAID Primary
Chassis
RAID Expansion
Chassis (optional)
1A
AB
2A 1B 2B
Gigabit Ethernet Switches
Control A
Media A
Control A
Control B
Media A
Media B
Control B
Media B
Control
FTP
Media Media
Control
Media Media
Control
FTP
Media Media
Control
Media Media
Control point PC
!
K2 SAS STORAGE
K2 clients
K2 SUMMIT
PRODUCTION CLIENT
K2 SUMMIT
PRODUCTION CLIENT
K2 SUMMIT
PRODUCTION CLIENT
K2 MEDIA SERVER K2 MEDIA SERVER K2 MEDIA SERVER K2 MEDIA SERVER
Control
ISLs
Control Control
FTP/streaming
Control B
Media B
Control A
Media A
!
K2 SAS STORAGE
!
K2 SAS STORAGE
!
K2 SAS STORAGE
GS K2 Media
Servers