GRASS VALLEY K2 - Dell R710 LS for Redundant K2 SAN

03 September 2009 K2 Storage Cabling Guide 45
Dell R710 LS for redundant K2 SAN
Dell R710 LS for redundant K2 SAN
These cabling instructions apply to the following:
• Dell R710 PowerEdge Server on a redundant online K2 SAN.
A
B
To media (iSCSI)
ports on GigE switch A
Fibre Channel
to RAID controller 0
To media (iSCSI)
ports on GigE switch B
Fibre Channel
to RAID controller 1
To control port
on GigE switch A
FTP: To control port
on GigE switch A
To control port
on GigE switch B
FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)