GRASS VALLEY K2 - Dell 1950 GS for Level 10 Basic K2 SAN; Dell 1950 GS for Level 10 Redundant K2 SAN

34 K2 Storage Cabling Guide 03 September 2009
Chapter 2 Cable K2 devices
Dell 1950 GS for Level 10 basic K2 SAN
These cabling instructions apply to the following:
• Dell 1950 PowerEdge Server on a Level 10 basic (non-redundant) K2 SAN.
Dell 1950 GS for Level 10 redundant K2 SAN
These cabling instructions apply to the following:
• Dell 1950 PowerEdge Server on a Level 10 redundant K2 SAN.
12
Gb 2Gb 1
To media (iSCSI)
port on GigE switch
Fibre Channel
to RAID controller
To control port
on GigE switch
FTP: To control port
on GigE switch
12
Gb 2Gb 1
12
Gb 2Gb 1
A
B
To media (iSCSI)
port on GigE switch A
Fibre Channel
to RAID controller 0
To media (iSCSI)
port on GigE switch B
Fibre Channel
to RAID controller 1
To control port
on GigE switch A
FTP: To control port
on GigE switch A
To control port
on GigE switch B
FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)