GRASS VALLEY K2 - Cable K2 RAID

52 K2 Storage Cabling Guide 03 September 2009
Chapter 2 Cable K2 devices
Cable K2 RAID
As directed by the system diagram for your K2 storage, cable the K2 RAID devices
using the instructions in this section.
• “K2 RAID for Level 2 basic K2 SAN” on page 53
• “K2 RAID for Level 2 redundant K2 SAN” on page 54
• “K2 RAID for basic K2 SAN” on page 55
• “K2 RAID for redundant K2 SAN” on page 56
• “K2 RAID for Level 10 basic K2 SAN” on page 57
• “K2 RAID for Level 10 redundant K2 SAN” on page 58
• “K2 RAID for Level 20 basic K2 SAN” on page 59
• “K2 RAID for Level 20 redundant K2 SAN” on page 60
• “K2 RAID for Level 30 basic K2 SAN” on page 61
• “K2 RAID for Level 30 redundant K2 SAN” on page 62
• “K2 RAID for Level 35 basic K2 SAN” on page 63
• “K2 RAID for Level 35 redundant K2 SAN” on page 64
• “K2 RAID for Nearline 10 basic K2 SAN” on page 65
• “K2 RAID for Nearline 10 redundant K2 SAN” on page 66
• “K2 RAID for K2 client direct-connect storage” on page 67