GRASS VALLEY K2 - Dell 2950 for Level 3 Basic K2 SAN

03 September 2009 K2 Storage Cabling Guide 39
Dell 2950 for Level 3 basic K2 SAN
Dell 2950 for Level 3 basic K2 SAN
These cabling instructions apply to the following:
• Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a Level
3 basic (non-redundant) K2 SAN.
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1Gb 2
Media File System Server
Media Database Server
iSCSI Bridge
Roles:
FTP Server
iSCSI Bridge
NAS Server
Roles:
To control port
on GigE switch
1
2
To control port
on GigE switch
FTP: To control port
on GigE switch
To media (iSCSI)
ports on GigE switch
To media (iSCSI)
ports on GigE switch
Fibre Channel
to RAID controller