GRASS VALLEY K2 - Preparing Level 2 devices

03 September 2009 K2 Storage Cabling Guide 27
K2 Summit Production Client with direct-connect storage
K2 Summit Production Client with direct-connect storage
These cabling instructions apply to the following:
• K2 Summit Production Client with direct-connect K2 RAID storage
Refer to the K2 System Guide for additional information about direct-connect storage.
Refer to the K2 Summit Production Client Quick Start Guide for additional cabling
details.
C1
C2 C3 C4
!
OK
~AC
!
OK
~AC
SDI IN1 SDI OUT1 SDI OUT2
LTC I/O
AES AUDIO RS422
SDI OUT1 SDI OUT2
USB/1394 100BT/1000BT
GPI
VGA REF. LOOP THROUGH
AES AUDIO RS422
LTC I/ O
SDI IN2 SDI IN3 SDI IN1 SDI IN2 SDI IN3 SDI IN1 SDI OUT1 SDI OUT2
LTC I/ O
AES AUDIO RS422
SDI OUT1 SDI OUT2
AES AUDIO RS422
LTC I/O
SDI IN2 SDI IN3 SDI IN1 SDI IN2 SDI IN3
K2 Summit Production Client
To K2 RAID
Controller
To K2 RAID
Controller