92 KARRERA — Installation & Service Manual
Section 5 — Basic Configuration
Menu application resets will be required, one to connect to the Frame and
another to register the Menu application IP with that Frame:
1. On the Karrera Menu application, go to Eng Setup, Node Settings, Frame
Suite Nodes & ID
(Figure 50).
Figure 50. Frame Suite Nodes & ID Menu
2. Enter the IP address the Menu will use to communicate with the Frame
in the
Frame IP Address field.
3. A Restart Menu dialog box will appear (Figure 51)
Figure 51. Restart Menu Dialog Box.
4. You can either touch Restart Now to restart Menu Panel application, or
you can
Cancel, make changes to the Image Store IP Address and Track
DPOPs from Panel IP, and then do a single Menu Panel restart.
To Next Page
Loading...
