5
Kula
Installation Manual
KPX, KPP & K5P Control Surface Connectors
Connector Description
1 2x PSU Connectors - Kycon KPPX 4Pin or Compatible
12V DC 8.33A
2 2x USB 2 Connectors
3 Monitor (MON) Output - to touch screen GUI
4 10/100/1000 base T, RJ45 network connectors to the switcher mainframe
5 2x Comms Connection
Important Note: NOT Ethernet, connections must be direct to a control
surface. Do Not use network switches or hubs.
CAT5 or above cables - crossover cables are Not suitable.
6 4x Comms Connection
See “Important Note” above
To Next Page
Loading...
