18
Cabling and Connections
Mainframe Connections
All other Connectors (all Kula mainframes)
USB 3.0
Two USB 3.0 connectors for fast data transfer. USB outputs are 5 V DC, 0.9 A each.
Network
Kula has 5 RJ45 10/100/1000 base T network connectors (NET X1 to NET X5)
There are 2 LED’s attached to each connector, the LED’s have different functions depending
on the type communication they are receiving, the list below describes the functions.
Connectors with XLR shells can be used to connect with these network connectors.
In each case LED - Lit = link, Flashing = traffic.
Left LED Right LED
1G bit (1000 base T):GREEN GREEN
100Mbit (100baseT):OFFGREEN
10Mbit (10baseT):YELLOWGREEN
No link:OFF OFF
Reference
Analogue reference input and output:
Note: NET X4 and NET X5 are Network 10/100/1000 base T for each IP rear
card control (RollCall).
‘A' card is NET X4
'B' card is NET X5
To Next Page
Loading...
