12
Cabling and Connections
Mainframe Connections
Mainframe Connections
Inputs
There are 36x SDI Inputs on the rear of a 2M/E Kula mainframe, the diagram below shows
the 2 rows of SDI inputs as would be seen looking at the rear of the mainframe.
Outputs
There are 12x SDO Outputs on the rear of a 2M/E Kula mainframe, the diagram below shows
the 2 rows of SDO Outputs as would be seen looking at the rear of the mainframe.
Bi-directional Input/Output BNCs
These are bi-directional BNCs, used as Inputs or Outputs.
For Inputs these are numbered 37 - 42 (19 - 24 for a 1M/E mainframe), a continuation from
the fixed inputs.
For Outputs these are numbered 13 - 18 (7 - 12 for a 1M/E mainframe), a continuation from
the fixed outputs.
Note: The following pages that describe connectors on a 2M/E Kula
Mainframe (unless indicated otherwise).
To Next Page
Loading...
