48
Specifications
Kula Control Surface Specifications
External Power Supplies
Power Supply Description
External PSU
for the KPP
Control
Surface
2x Fully independent external PSU modules with separate mains power feeds
via 2x 10A IEC leads.
Output from each PSU = 12V DC 100W via Kycon KPPX 4 Pin or Compatible
connectors to the KPX and KPP control surface.
2 supplied as standard, 2 PSUs provide dual redundancy.
External Mains Power Supply Requirements
Voltage 100V - 240V 50/60Hz
Power Less than 120 Watts
To Next Page
Loading...
