Page
Note:
the presets for “stick mode”, “modulation” and “collective pitch min.” are automatically adopted when you call up a
model memory, but can then be changed separately for that memory in the »Base setup model« menu, if prefer-
red.
• • Servo display The servo outputs can be checked on-screen, taking into account all coupling and mixer functions etc. when you
operate the corresponding transmitter control (useful aid when programming).
118
• • Code lock A four-character code number can be entered using the four side buttons, or erased with a short press of the ro-
tary control (CLR) and subsequently corrected. Confi rm by pressing the ENTER button. When you switch the mc-
22s on again access to the multi-function menu remains barred until you enter the correct code.
119
Brief programming instructions
To Next Page
Loading...