EasyManua.ls Logo

GRAUPNER MC-22S

GRAUPNER MC-22S
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Menu
Menu
Display
Display
Description of program expansions and operating notes
Description of program expansions and operating notes
Page
Page
Swashplate mixer Mixer ratios for collective pitch, roll and pitch-axis are separately variable (-100% ... +100%), with the exception of
helicopters with only one collective pitch servo. CLEAR resets changed values to 61%.
Important:
Ensure that servos are not mechanically obstructed if you set large values.
111
Auxiliary functions
Auxiliary functions
Fail-safe adjust In PCM20 mode:
„Time“: all servos to “hold” mode, or enter a delay time (1, 0.5 or 0.25 sec.) using rotary control, after
which servos 9 and 10 take up the neutral position, and servos 1 ... 8 take up a position defi nable
using STO.
“Battery F.S.”: three possible servo positions can be selected (-75%, 0%, +75%, plus “off”) for servo 1 in fi xed-
wing models and model helicopters.
112
In SPCM20 mode:
Servos 1 ... 8 can be programmed to hold-mode or position mode. Save selected position using STO. Servos 9
and 10 remain in hold mode.
114
Teacher/pupil After assigning a switch (preferably a momentary switch or kick-button), control functions 1 ... 8 can be transferred
to a Pupil transmitter. All model programming is carried out at the Teacher transmitter. The pupil transmitter’s con-
trol functions must affect the control channels, i.e. the receiver outputs, directly, without any mixers or other set-
tings being involved. The modulation of the Pupil transmitter must be set to PPM! Only stick mode, throttle / coll-
ective pitch reverse and idle trim should be set up to suit the pupil’s preferences.
115
Global functions
Global functions
Basic settings Owner’s name: max. 15 characters (letters, numbers, special symbols). Use rotary control to select
characters from the symbol table on the second screen page.
Preset stick mode: the stick mode selected at this point is adopted as standard for all new model memo-
ries.
Preset modulation: PCM20 for all “mc” or “DS mc” type PCM receivers (512 steps)
SPCM20 for all “smc” type SPCM receivers (1024 steps)
PPM18 for all PPM-FM receivers to date except DS 24 FM
PPM24 for “DS 24 FM” PPM FM receiver
Expert mode: „no“: some menus are suppressed in the multi-function list when a new model is set up;
simplifi es programming for the beginner. Suppression of menus can be reversed in the
»Suppress Codes« menu if desired.
“yes” all mc-22s menus are accessible when a new model is set up.
Preset coll. pitch min.: Defi nes the collective pitch minimum position of the Ch1 stick – “forward” or “back”.
117
Brief programming instructions
Brief programming instructions
for all fi xed-wing and helicopter programs

Table of Contents