30 / 34 S1006.PRO_mz-24_PRO_EN USA
Safety Notes
These safety instructions are intended to protect this product, yourself and
the safety of others. Please read this section very carefully before using this
product!
♦ Check all relevant laws and regulations before using this
remote control model. These laws and regulations must
be observed in for the safety of yourself and others and
may vary by state, region, or country.
♦ First-time users: carefully familiarize yourselves with this
model’s functions and commands. Always exercise
caution and operate this model responsibly.
♦ To avoid risk of suffocation, keep packaging materials
away from babies and small children.
♦ Supervision by an experienced adult is required for
children, persons mentally or physically handicapped,
novices, or anyone not capable of safely using this
product.
♦ Special liability insurance policies are mandatory for all
device operations. If you already own a device, determine
if the respective model is covered by your insurance.
♦ Protect all equipment from dust, dirt, moisture, vibration
and excessive heat or cold. The models may only be
operated remotely in normal outside temperatures
ranging from
15°F to 130°F (-10°C to 55°C).
♦ To ensure safe operation, always perform a range test
and functional test on the ground before you use your
model!
♦ Maintain frequent updates of your HoTT components
with the latest firmware version.
♦ Save the log file of the model after each use. Information
in the log can help to diagnose technical failures, and be
used to submit claims about performance.
♦ For additional questions or support, contact the Graupner
USA Service Center, or an experienced user.
Transmitter Safety
WARNING
Rotating propellers can cause injury. To make sure the connected motors
cannot accidentally start when programming the transmitter, turn the
transmitter’s motor off, or detach the propellers.
CAUTION
Short-circuiting the transmitter sockets can create a fire hazard. Use only
suitable connectors. Never change or modify the electronic components
of the transmitter. Reconstruction and/or modification of the product is
prohibited by law.
Note
Carefully pack the model and transmitter when transporting to protect
from damages and excessive vibration.