Gree FLEXX Series

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
99
Disassembly and Assembly of the Electric Box
Step
Picture
Work instruction
3. Remove the electric element.
● Disconnect the electric element from the
wiring terminal.
● Loosen screws around the electric
element with a screwdriver.
● Remove the electric element from the
electric box.
4. Mount the new electric
element.
● Place the electric element at the proper
position.
● Tighten the screws around the electric
element with a screwdriver.
● Wire the electric element to the wiring
terminal.
5. Reinstall the electric box.
● Place the electric box at the proper
position.
● Tighten screws around the electric box
with a screwdriver.
● Connect the power cord and control line
properly.
● Reassemble the unit as before.
Disassembly and Assembly of the Fan Motor
Step
Picture
Work instruction
1. Remove the upper panel.
● Loosen screws round the upper panel
with a screwdriver.
● Remove the upper panel from unit.