Gree FLEXX Series

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
101
Disassembly and Assembly of the Evaporator and Drain Pan
Step
Picture
Work instruction
2. Remove the lower panel (1)
and panel (2).
● Loosen screws round the lower panel
with a screwdriver.
● Remove the lower panel from unit.
3. Remove the enhanced frame
if applicable.
● Remove the screws from enhanced
frame.
● Disassemble the enhanced frame from
the unit.
4. Remove the mounting plate of
the drain pan.
● Loosen screws at both side of the
mounting plate with a screwdriver.
● Remove the mounting plate from the
unit.
5. Remove the primary drain
pan.
● Remove the primary drain pan from the
unit.