GREE DC INVERTER HEAT PUMP CONDENSING UNIT
63
balance mouth. The suction and exhaust openings of the compressors must be sealed. If a rubber seal is missing,
user adhesive tape to seal the opening. This is to prevent the compressor oil from contacting the air.
NOTICE:
Before replacement, make sure the nameplates and models of the compressors are identical.
NOTICE:
Make sure the lubricant is sealed inside the compressors.
Make sure the rubber seals
of the suction and exhaust
openings of the compressor
are in good condition.
Make sure the electric box cover of
the compressor is in good condition.
To Next Page
Loading...
