What to do if the SOC display does not display correctly on my GRESGYING Battery Charger?
- CChristopher NguyenNov 16, 2025
If the SOC Display on your GRESGYING Battery Charger is not displaying correctly or at all, there could be several reasons. It might be due to a faulty SOC display assembly, which would require replacing the assembly. Alternatively, ensure that the charging module is properly inserted into its place. Also, check if the charging cable is correctly connected to the vehicle. Another reason could be that the cabinet door is not closed properly; try restarting the charger after closing the door. Verify that the battery charging demand voltage matches the maximum output voltage of the charging station and that the BMS demand voltage of the charging equipment is consistent with the output BMS voltage of the charging station. It could also be a system error, in which case you should check the faul...

