Greyline Instruments SLT32 - Page 39

DATALOGGING(Optional)
Setup
From R
UNSTOPSETUP press Æ to SETUP andthen È to LogSiteID0.Press Æ topositionthe
cursorunderthenumeraland È or Ç tochangethenumerals.The“SiteID”numberisretainedwith
dataloggingsessionstoidentifylogsstoredfromdifferentlocations.
FormattedData
Press È fromLogSiteIDandpress È fromFormatted.“Formatted”datastoresasummaryofflow
readingsoverauser-selectabletimeperiod.Thesummaryincludes:
DATEandTIME
IntervalTOTAL
IntervalAVERAGE
IntervalMAXFLOW
IntervalMAXFLOWTIME
IntervalMINFLOW
IntervalMINFLOWTIME
From F
ormatted press È to Start MMMDD/YYYY (eg: Jan01/2000).Press Æ topositionthe
cursorandthen È or Ç tosettheMonth,DayandYearthatloggingwillStart.Press Æ toreturnto
S
tart.
Press È to S
tart (time)and Æ topositionthecursorunderthetimecolumn HH/MM/SS (24hour
clockinHours/minutes/seconds,eg: 23:02:16)andthen È or Ç tosettheloggingstartTime.Press
Æ toreturnto Start .
Press È to I
nterval and Æ tothe Hrs column.Press È or Ç toselecttheflowlogginginterval.
Choosefrom:
24Hrs,or 12Hrs,or 8Hrs,or 4Hrs,or 1Hrs
Press Æ toreturnto I
nterval.Press È andtheSLT32willreport xxxxx HrsLeft indicatingthe
amountofloggingtimeavailablewithyourcurrentset-up.Youcanalsopress Ç toreturntoprevious
menuitemsandmakechanges.
Press È to WrapAroundYes?.Press Æ to Yes? and È toenabletheloggingwrapfunction.In
WrapAroundmodethe oldest datawillbeoverwrittenbythe newest.IfWrapAroundisnotenabledthe
loggerwillstopwhenitsmemorybecomesfull.
Press È to R
esetLog?Yes.Press Æ to Yes andthen È toresettheLoganderaseallprevious
sessionsandstoredvalues.Orpress È from R
esetLog? toretainexistingdataintheLog.TheSLT32
willdisplay“xxxxxHrs/DaysLeft”.
SLT32Level&FlowMonitor
ManualSeriesB.11
Page 39