Greyline Instruments SLT32 - Page 40

Fromthe xxxxxHrsLeft displaypress È to Store?Yes.Press Æ to Yes andthen È tosave
yourDataLoggingsetup,orpress È from S
tore? tocancelchangesmadeaboveandexitwithout
storingchanges.
FromtheDataLogging Store?Yes promptthemenuwillreturnto R
UNSTOPSETUP.Press Æ to
positionthecursorunder R
UN andpress È toactivatetheDataLoggertostartatyourselectedstartDate
andTime.TheSLT32willdisplay SESSIONNO.x.Press È toreturnto DATALOGGING.
ViewingFORMATTEDDataLogsontheSLT32Display
24HourFormattedlogscanbevieweddirectlyontheSLT32display.From RUN press Æ to 24HR
LOG.Thisfunctionisavailableonlyif24HourFormattedlogginghasbeenStoredfromtheData
Loggingmenu.
The24HourLogReportisdesignedtobereadonelineattimeusingthe Æ key.Usingthe È or Ç
keyswillreturnthedisplaytotheDatecolumn.
TODAYSDATE DAILYTOTAL DAILYAVERAGE MAXFLOW MAXFLOWTIME MINFLOW MINFLOWTIME
PREVIOUSDATE “ “ “ “ “ “
PREVIOUSDATE “ “ “ “ “ “
PREVIOUSDATE “ “ “ “ “ “
PREVIOUSDATE “ “ “ “ “ “
PREVIOUSDATE “ “ “ “ “ “
Thecurrentdayplusthepast255daysofdatacanbedisplayed.(GreylineLoggersoftwarewilldisplay
upto1300daysofdata.)
TrendDataLogging-Setup
From R
UNSTOPSETUP press Æ to SETUP andthen È to LogSiteID0.Press Æ topositionthe
cursorunderthenumeraland È or Ç tochangethenumerals.The“SiteID”numberisretainedwith
dataloggingsessionstoidentifylogsstoredfromdifferentlocations.
From LogSiteID press È to FormattedTrend andpress Æ topositionthecursorunder
T
rend.Thenpress È toselect Time basedlogging.
‘Time’basedTrendLogging
Time basedloggingallowsyoutochooseStartandStoptimesandalogginginterval.
From T
ime press È to StartMMMDD/YYYY (eg: Jan01/2000).Press Æ topositionthecursor
andthen È or Ç tosettheMonth,DayandYearthatloggingwill S
tart.Press Æ toreturntoStart.
SLT32Level&FlowMonitor
ManualSeriesB.11
Page 40