Model G0771Z (Mfd. Since 01/21)
-7-
The information contained herein is deemed accurate as of 10/10/2016 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G0771Z
Main Specifications:
Main Information
Table Saw Type....................................................................................................................................... Hybrid
Maximum Blade Diameter......................................................................................................................... 10 in.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed...................................................................................................................................... 3450 RPM
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt Direction....................................................................................................................................... Left
Max Blade Tilt......................................................................................................................................... 45 deg.
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/4 in.
Maximum Depth of Cut At 45 Degrees.................................................................................................. 2-1/4 in.
Max Rip Right of Blade w/Included Fence & Rails.................................................................................... 30 in.
Max Rip Left of Blade w/Included Fence & Rails....................................................................................... 15 in.
Additional Blade Information
Included Blade Information.................................................................................................................. 10" x 40T
Riving Knife/Spreader Thickness.......................................................................................................... 0.090 in.
Required Blade Body Thickness.............................................................................................. 0.060 – 0.086 in.
Required Blade Kerf Thickness............................................................................................... 0.094 – 0.126 in.
Rim Speed at Max Blade Diameter.................................................................................................... 9025 FPM
Table Information
Floor to Table Height........................................................................................................................... 35-3/8 in.
Table Size with Extension Wings Width.............................................................................................. 40-1/2 in.
Table Size with Extension Wings Depth.................................................................................................... 27 in.
Distance Front of Table to Center of Blade......................................................................................... 15-1/2 in.
Distance Front of Table to Blade At Maximum Cut............................................................................. 11-1/2 in.
Main Table Size Thickness.................................................................................................................... 1-5/8 in.
Fence Information
Fence Type.............................................................................................. Camlock T-Shape w/Aluminum Face
Fence Size Length............................................................................................................................... 35-5/8 in.
Fence Size Width.................................................................................................................................. 3-1/4 in.
Fence Size Height............................................................................................................................... 2-7/16 in.
Fence Rail Type.................................................................................................................. Extruded Aluminum
Fence Rail Length...................................................................................................................................... 64 in.
Fence Rail Width................................................................................................................................... 3-1/8 in.
Fence Rail Height.................................................................................................................................. 2-3/8 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table.................................................................................................................................................... Cast Iron
Wings................................................................................................................................................... Cast Iron
Cabinet................................................................................................................................... Pre-Formed Steel
Trunnions............................................................................................................................................. Cast Iron
Fence Assembly................................................................................................................................. Aluminum
Rails.................................................................................................................................................... Aluminum
Miter Guage Construction................................................................................................................... Aluminum
Guard............................................................................................................................... Aluminum and Plastic
Body/Cabinet Paint Type/Finish................................................................................................ Powder Coated
Arbor Bearings.......................................................................................... Sealed and Permanently Lubricated
Other Related Information
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size.............................................................................................................................................. 4 in.
Compatible Mobile Base........................................................................................................................ D2057A
To Next Page
Loading...
Need help?
General
