Grizzly G0803 User Manual

-36-
G0803 (Mfd. Since 09/15)
G0710—1HP Wall-Mount Dust Collector
G0710P—1HP Wall-Mount Dust Collector
G1163P—1HP Floor Model Dust Collector
G3591—30 Micron Replacement Bag
H4340—3.0 Micron Upgrade Bag
Excellent point-of-use dust collectors that can
be used next to the machine with only a small
amount of ducting. Specifications: 450 CFM, 7.2"
static pressure, 2 cubic foot bag, and 30 micron
filter. Motor is 1HP, 110V/220V, 14A/7A.
Figure 43. Point-of-use dust collectors.
Model G1163P
Model G0710
order online at www.grizzly.com or call 1-800-523-4777
Figure 45. Assortment of basic eye protection.
Basic Eye Protection
T20501—Face Shield Crown Protector 4"
T20502—Face Shield Crown Protector 7"
T20503—Face Shield Window
T20451—“Kirova” Clear Safety Glasses
T20452—“Kirova” Anti-Reflective S. Glasses
H7194—Bifocal Safety Glasses 1.5
H7195—Bifocal Safety Glasses 2.0
H7196—Bifocal Safety Glasses 2.5
T20502
T20452
T20503
H7194
T20451
D3197—24" Aluminum Ruler with Handle
D2828—12" Stainless Steel Ruler
T25676—6" Stainless Steel Rule
G9639—90° Wide Base Square 2
3
⁄4" x 4"
These high-quality, precision measuring tools are
perfect for squaring and aligning your bandsaw
table, calibrating the tilt scale, and wheel align-
ment adjustments.
W1315—Wire Hose Clamp 2 "
W1317—Wire Hose Clamp 4"
D4226—Dust Collection Reducer 2 " x 4" OD
D4206—4" x 10' Clear Hose
D4202—2' x 10' Clear Hose
W1007—Plastic Blast Gate 4"
W1053—Anti-Static Grounding Kit
We've hand picked a selection of dust collection
components commonly needed to connect your
new machine to basic dust collection.
Figure 44. Dust collection accessories.
W1315
W1317
W1007
W1053
D4226
D4206
D4202
Figure 46. Measuring tools.
D3197
D2828
G9639
T25676

Grizzly G0803 Specifications

General

Brand	Grizzly
Model	G0803
Category	Saw
Language	English