Grizzly G0803 - Labels

G0803 (Mfd. Since 09/15)
-53-
Labels
REF PART # DESCRIPTION REF PART # DESCRIPTION
201 P0803201 GRIZZLY INDUSTRIAL LOGO LABEL 207 P0803207 ELECTRICITY LABEL
202 P0803202 MODEL NUMBER LABEL 208 P0803208 EYE/LUNG INJURY HAZARD LABEL
203 P0803203 GRIZZLY GREEN TOUCH-UP PAINT 209 P0803209 MACHINE ID LABEL
204 P0803204 DO NOT OPEN DOOR LABEL 210 P0803210 GRIZZLY.COM LABEL
205 P0803205 DISCONNECT POWER LABEL 211 P0803211 READ MANUAL LABEL
206 P0803206 GRIZZLY BLACK TOUCH-UP PAINT
grizzly.com
G0803 Machine Labels B
(8/5/15)
G0803
G0803 Machine Labels A
(8/5/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005
WARNING
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
Specifications
Motor: 1/3 HP (320W), 110V, 60 Hz
Full-Load Amp Draw: 2.8A
Blade Speed: 2460 FPM
Standard Blade Length: 62"
Blade Length Range: 61-13/16" – 62-3/16"
Blade Width Range: 1/8" – 3/8"
Max. Cutting Width Left of Blade: 8-7/8"
Max. Cutting Height: 3-5/8"
Table Size: 12" x 12"
Table Tilt: 0˚L ⁄ 45˚R
Weight: 44 lbs.
MODEL G0803
9" BANDSAW
Date
S/N
Mfd. for Grizzly in China
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
G0803 Machine Labels A
(8/5/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
Specifications
Motor: 1/3 HP (320W), 110V, 60 Hz
Full-Load Amp Draw: 2.8A
Blade Speed: 2460 FPM
Standard Blade Length: 62"
Blade Length Range: 61-13/16" – 62-3/16"
Blade Width Range: 1/8" – 3/8"
Max. Cutting Width Left of Blade: 8-7/8"
Max. Cutting Height: 3-5/8"
Table Size: 12" x 12"
Table Tilt: 0˚L ⁄ 45˚R
Weight: 44 lbs.
MODEL G0803
9" BANDSAW
Date
S/N
Mfd. for Grizzly in China
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005
WARNING
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
MODEL G0803
9" BANDSAW
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
G0803 Machine Labels A
(8/5/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005
WARNING
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
Specifications
Motor: 1/3 HP (320W), 110V, 60 Hz
Full-Load Amp Draw: 2.8A
Standard Blade Length: 62"
Blade Length Range: 61-13/16" – 62-3/16"
Blade Width Range: 1/8" – 3/8"
Max. Cutting Width Left of Blade: 8-7/8"
Max. Cutting Height: 3-5/8"
MODEL G0803
9" BANDSAW
Date
S/N
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005
WARNING
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
PANTONE 151 C or RAL 2005
WARNING
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
G0803 Machine Labels A
(8/5/15)
• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
Specifications
Motor: 1/3 HP (320W), 110V, 60 Hz
Full-Load Amp Draw: 2.8A
Blade Speed: 2460 FPM
Standard Blade Length: 62"
Blade Length Range: 61-13/16" – 62-3/16"
Blade Width Range: 1/8" – 3/8"
Max. Cutting Width Left of Blade: 8-7/8"
Max. Cutting Height: 3-5/8"
Table Size: 12" x 12"
Table Tilt: 0˚L ⁄ 45˚R
Weight: 44 lbs.
MODEL G0803
9" BANDSAW
Date
S/N
Mfd. for Grizzly in China
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
201
202
204
203
204
205
206
207
208
209
210
211
grizzly.com
COLOR CODE
GRIZZLY BEIGE
PANTONE 7527 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0803
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.