Model G1033/X/Z (Mfd. Since 02/19)
-31-
order online at www.grizzly.com or call 1-800-523-4777
Figure 35. 20" Grizzly planer knives.
For G1033 & G1033Z:
T10153—20" Replacement Knives, Set of 4
These Japanese-made 20" x 1" x
1
⁄8" planer knives
will outlast any other steel knives on the market—
period! Manufactured from a superior blend of
quality steel and double-ground to a 42° + 45°
edge angle, and including a higher percentage
of Molybdenum for longer edge retention, these
knives will not disappoint!
G5562—SLIPIT® 1 Qt. Gel
G5563—SLIPIT® 12 Oz. Spray
G2871—Boeshield® T-9 12 Oz. Spray
G2870—Boeshield® T-9 4 Oz. Spray
H3788—G96® Gun Treatment 12 Oz. Spray
H3789—G96® Gun Treatment 4.5 Oz. Spray
Figure 36. Recommended products for
protecting unpainted cast iron/steel parts on
machinery.
SB1365—South Bend Way Oil-ISO 68
Engineered for the high pressure exerted on
horizontal or vertical ways and slides. Protects
against rust and corrosion. Ensures stick-free,
smooth motion which maximizes finishes and
extends the life of your machine. Won’t gum up!
12 oz. AMGA#2 (ISO 68 Equivalent).
Figure 37. SB1365 Way Oil.
T28042—Moly-D Industrial Gear Oil-ISO 320
This industrial gear oil from Primrose has been
developed specifically for the high temperatures
and pressures typical of modern industrial appli-
cations. 1-gallon size.
Figure 38. T28042 Gear Oil.
T26419—Syn-O-Gen Synthetic Grease
100% pure synthesized hydrocarbon basestocks
compounded with special thickeners and addi-
tives make Syn-O-Gen non-melt, tacky, and water
resistant. Extremely low pour point, high tem-
perature oxidation, and thermal stability produce
a grease unmatched in performance.
Figure 39. T26419 Synthetic Grease.
To Next Page
Loading...
Need help?
General
