-30-
Model G1033/X/Z (Mfd. Since 02/19)
SECTION 5: ACCESSORIES
ACCESSORIES
order online at www.grizzly.com or call 1-800-523-4777
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
Figure 32. W1218A Rotacator™ Precision
Planer Tool.
W1218A—Rotacator™ Precision Planer Tool
The Rotacator is a dial indicator on a magnetic
base, designed for quickly and accurately set-
ting the critical tolerances needed when making
planer adjustments. Perfect for adjusting infeed/
outfeed rollers, pressure bars, chip breakers,
and bed rollers. Also a great setup tool for other
machines! Accurate to 0.001". Indicator rotates
360°.
For G1033 & G1033Z:
H7769—20" Byrd
®
Shelix Cutterhead
Made in the U.S.A. by Byrd, this indexable car-
bide insert cutterhead is the best money can
buy—period! The inserts are not only placed in a
spiral pattern, they are also positioned at an angle
so the shearing action leaves a glassy smooth cut
on the toughest and most figured woods. Comes
with 5 extra replacement inserts. Great upgrade!
Figure 33. H7769 Byrd Shelix Cutterhead.
For G1033X:
H9893—Indexable Carbide Inserts, 10-Pack
These Indexable Carbide Inserts are designed
for use in spiral cutterhead systems and made
to last up to 10 times longer than a set of HSS
steel inserts. Made of solid carbide. Size: 15 x 15
x 2.5mm.
Figure 34. H9893 Indexable Carbide Inserts.
To Next Page
Loading...
Need help?
General
