Growatt SPF 5000TL HVM User Manual

28
28
Address setting
48V model: default 1, 1~255 Settable
24V model: default 1, 1~255 Settable
43
Battery equalization
Battery equalization enable
Battery equalization disable(default)
If “Flooded” or “User-Defined” is selected in program 05, this program
can be set up.
44
Battery equalization Voltage
48V model: default 58.4V, 48.0V~58.4V Settable
24V model: default 29.2V, 24.0V~29.2V Settable
45
Battery equalized time
Default 60min, 5min~900min
Settable
46
Battery equalized timeout
Default 120min, 5min~900min
Settable
47
Equalization interval
Default 30days, 1 days~90 days
Settable
48
Equalization activated
immediately
Equalization activated immediately
on
Equalization activated immediately
off(default)
If equalization function is enabled in program 43, this program can be
setup. If “On” is selected in this program, it’s to activate battery
equalization immediately and LCD main page will shows “ ”. If “Off”
is selected, it will cancel equalization function until next activated
equalization time arrives based on program 47setting. At this time,
“ ” will not be shown in LCD main page.

Growatt SPF 5000TL HVM Specifications

General

Rated Power	5000W
Input Voltage	230VAC
Output Voltage	230VAC
Frequency	50/60Hz
Efficiency	93%
Battery Voltage	48V
Max. PV Array Power	6000W
Max. DC Voltage	450VDC
Number of MPPT Trackers	1
Max. Input Current	18A
Max. AC Output Current	21.7A
Max. Charging Current	80A
Max. Discharging Current	80A
Operating Temperature Range	-10°C to 50°C
Protection Degree	IP20
Cooling Method	Fan
Dimensions	330 x 485 x 135 mm
Communication	RS232, USB
MPPT Range	120-430VDC