Grundfos CRE - Page 25

7.2.3 Menu overview for advanced operating panel
"Home"
"Home"
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
CME Multipump system
● ● ●
"Status"
"Status"
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
CME Multipump system
"Operating status" ● ● ●
"Operating mode, from" ● ● ●
"Control mode" ● ● ●
"Pump performance" ● ● ●
"Actual controlled value" ● ● ●
"Resulting setpoint" ● ● ●
"Speed" ● ● ●
"Acc. flow and specific energy" ● ● ●
"Power and energy consumption" ● ● ●
"Measured values" ● ● ●
"Analog input 1" ● ● ●
"Analog input 2" ● ● ●
"Analog input 3" ● ●
●
1)
"Pt100/1000 input 1" ● ●
●
1)
"Pt100/1000 input 2" ● ●
●
1)
"Analog output" ● ●
●
1)
"Warning and alarm" ● ● ●
"Actual warning or alarm" ● ● ●
"Warning log" ● ● ●
"Alarm log" ● ● ●
"Operating log" ● ● ●
"Operating hours" ● ● ●
"Module type" ● ● ●
"Date and time" ● ● ●
"Product identification" ● ● ●
"Motor bearing monitoring" ● ● ●
"Multi-pump system" ●
"System operating status" ●
"System performance"" ●
"System input power and energy"" ●
"Pump 1, multi-pump system"" ●
"Pump 2, multi-pump system"" ●
"Pump 3, multi-pump system"" ●
"Pump 4, multi-pump system"" ●
1)
Only available if an advanced functional module, type FM 300, is fitted.
25
English (US)