English (GB)
22
5.4.3 Production status
The initial display shows a brief production status message, see section 7.2 Initial display. A more detailed status message is given in the
production status menu, see 8.6.1 Production.
Initial display Production status Description
"production terminated""production terminated"
Production
• not started
• terminated by the operator
• terminated by a failure
"prod. waiting""production waiting"
• Waiting for ClO
2
solution below K1 to be discharged into internal batch tank.
• Waiting for a stable level in the reaction tank after production start.
• Waiting for the internal batch tank to be discharged by ClO
2
dosing pump.
"prod. waiting"
"HCl empty, system
waiting"
The HCl container is empty and the HCl pump has stopped.
"prod. waiting"
"NaClO2 empty, system
waiting"
The NaClO
2
container is empty and the NaClO
2
pump has stopped.
"prod. running"
"1st dilution water" First water supply is running (from empty reaction tank to level K1).
"HCl pump running" HCl pump is running (from level K1 to level K2).
"NaClO2 pump running"NaClO
2
pump is running (from level K2 to level K3).
"reaction time""reaction time" Reaction time is running (at level K3).
"prod. running"
"2nd dilution water" Second water supply is running (from level K3 to level K4).
"3rd dilution water" Third water supply is running (from K4 until K5 signals full).
"filling int. batch tank"
Reaction tank is discharged into internal batch tank (from stop of third water supply
until level K1).
"flushing""flushing is running" Reaction tank is flushed due to an unknown level after production start.
To Next Page
Loading...
