What does 'Heater 2 Gas Pressure Out of Range' mean on my GSi Touch terminals?
If your GSi Touch terminals display 'Heater 2 Gas Pressure Out of Range', it means the optional gas pressure switch on heater #2 fuel train has opened. You should reduce the gas pressure.
What to do if my GSi Touch terminals display 'Heater 1 Digital Plenum Temp Hi- Limit'?
If your GSi Touch terminals display 'Heater 1 Digital Plenum Temp Hi- Limit', it indicates that the mechanical 250 degree plenum temp hi-limit has opened. Check for a possible fire or overheated grain.
Why does my GSi Touch terminals show 'Heater 1 Fan Motor Overload'?
The 'Heater 1 Fan Motor Overload' message on your GSi Touch terminals indicates that the thermal overload for fan #1, located in the fan #1 electrical box, has tripped, indicating an overcurrent condition. The overload must be reset manually.
Why does my GSi Touch terminals show 'Heater 2 Fan Motor Overload'?
The 'Heater 2 Fan Motor Overload' message on your GSi Touch terminals indicates that the thermal overload for Fan #2, located in the fan #2 electrical box, has tripped, indicating an over-current condition. The overload must be reset manually.
What does 'Dump Chutes Closed but Open Switch Still ON' mean on GSi Touch terminals?
This message on your GSi Touch terminals indicates that the dump chutes have closed, but the controller still detects the Open Microswitch on the chute controller in a closed position. This means the open microswitch is likely defective or stuck closed.
General| Brand | GSi |
|---|---|
| Model | TopDry Terminal 24 |
| Category | Control Panel |
| Connectivity | Ethernet |
| Ports | Ethernet |
| Operating Temperature | 0°C to 40°C |
| Humidity | non-condensing |
General rules for safe operation and maintenance.
Explains symbols used for hazards, warnings, and notices.
Details on personal protective equipment and general safety instructions.
Describes the basic function and components of the dryer.
Overview of the control panel's buttons, switches, and touchscreen.
Essential checks before initial dryer startup.
Critical steps for immediate shutdown.
Step-by-step guide for the first startup of the dryer.
Lists common error messages and their causes/remedies.
To Next Page