The closed position is with the lever in line with
the front fork with “close” visible.
Push the quick-release lever fully closed.
You should need to use the palm of your hand
to close the quick release lever with as much
strength as possible.
If the lever is too easy to close return it to the
open position and tighten the adjustment nut a
quarter turn clockwise. Repeat as required.
If the lever is too stiff to close return it to the open
position and loosen the adjustment nut a quarter
turn anti-clockwise. Repeat as required.
Make sure that the wheel can rotate
freely.
Make sure the quick release lever
is in fully closed position and that
the wheel is attached securely.
Incorrect tting may result in the
wheel becoming loose when riding
or the quick release lever snagging
on obstructions. This could lead to
serious injury.
Should you have any concerns
regarding tting the wheel we
recommend your bike is checked
by a professional bike shop.
To Next Page
Loading...