Guldmann GH3 - Lifting Hanger Installation

Fig. 1
Fig. 3
Fig. 2c
Fig. 2b
Fig. 2a
10
© Guldmann GB/US-02/2021 • # 550216_19
© Guldmann GB/US-02/2021 • # 550216_19
1.10 Installation of the lifting hanger before use
Lifting hangers from other
manufacturers
Guldmann shall not be liable for faults
or accidents that may occur as a result
of using lifting hangers made by other
manufacturers.
If there is any doubt about the selec-
tion or use of a lifting hanger, please
contact your supplier.
The lifting hanger can be installed to the
lifting strap without the use of any tools.
1. Press the yellow button and hold it in
while the lifting strap’s hook is inserted
into the opening of the top cover of the
lifting hanger (g. 2a - 2b).
2. Release the yellow button (g. 2c)
3. Rotate the strap attachment to a vertical
position (g. 3).
Check that the yellow button has retur-
ned to its locked position by checking
that it is ush with the cover of the lifting
hanger and that the strap attachment
can rotate freely.