GW Instek GDM-9060 - Page 317

REMOTE CONTROL
317
[SENSe:]TEMPerature:FRTD:ALPHa
Sets the 4-wire RTD Alpha coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:FRTD:ALPH 0.00385
[SENSe:]TEMPerature:FRTD:ALPHa?
Returns the 4-wire RTD Alpha coefficient.
[SENSe:]TEMPerature:FRTD:BETA
Sets the 4-wire RTD Beta coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:FRTD:BETA 0.00495
[SENSe:]TEMPerature:FRTD:BETA?
Returns the 4-wire RTD Beta coefficient.
[SENSe:]TEMPerature:FRTD:DELTa
Sets the 4-wire RTD Delta coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:FRTD:DELT 0.000568
[SENSe:]TEMPerature:FRTD:DELTa?
Returns the 4-wire RTD Delta coefficient.
[SENSe:]TEMPerature:FRTD:RESistance[:REFerence]
Sets the reference resistance (R0) of 4-wire RTD measurement
Parameter: <NRf> (80.0 ~ 120.0) | MIN | MAX | DEF
Example: SENS:TEMP:FRTD:RES:REF 100
[SENSe:]TEMPerature:FRTD:RESistance[:REFerence]?
Returns the 4-wire RTD reference resistance (R0).
[SENSe:]TEMPerature:FRTD:TYPE
Sets the 4-wire RTD sensor type.
Parameter: Type(PT100 | D100 | F100 | PT385 | PT3916 | USER)
Example: SENS:TEMP:FRTD:TYPE PT100
Sets the 4-wire RTD sensor to PT100
[SENSe:]TEMPerature:FRTD:TYPE?
Returns the 4-wire RTD sensor type.
Return parameter: PT100 | D100 | F100 | PT385 | PT3916 | USER
[SENSe:]TEMPerature:THERmistor:APARameter
Sets the 2-wire Thermistor A coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:THER:APAR 0.002154.
w ww. . com
information@itm.com1.800.561.8187