GW Instek GDM-9060 - Page 321

REMOTE CONTROL
321
TRIGger:DELay:AUTO
Sets the trigger delay time auto mode on/off in all of the function.
Parameter: 0 | 1 | ON | OFF
Example: TRIG:DEL:AUTO OFF
Turns trigger delay time auto mode off.
TRIGger:DELay:AUTO?
Returns the trigger delay time auto mode state.
Return parameter: 0 | 1, 1=ON, 0=OFF.
TRIGger:SLOPe
Selects whether the instrument uses the rising edge (POS) or the falling
edge (NEG) of the trigger signal on the rear-panel Digital I/O connector
when external trigger is selected;
Parameter: POSitive | NEGative
Example: TRIG:SLOP POS
Sets the trigger signal in rising edge (POS).
TRIGger:SLOPe?
Returns the method of external trigger.
Return parameter: POS | NEG
w ww. . com
information@itm.com1.800.561.8187