GDM-906X Series User Manual
70
Toggle the active display between
the 1ST and 2ND display by
pressing the Knob key:
Primary display: 1ST highlighted in
orange outline.
Secondary display: 2ND highlighted
in orange outline.
1ST in active display:
2ND in active display:
2. Edit active
display settings
Edit the range, rate or measurement
item for the active display in the
same way as for single measurement
operation. See the Basic
Measurement on page 26 for details.
To turn Off the 2ND measurement,
first toggle in 1ST active display
followed by pressing the F6 (2ND)
key. Click the F6 (OFF) key again to
disable the 2ND measurement.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
