DC Current measurements will be displayed as a
negative value as the polarity of the current leads has
been reversed.
Please take into account the resistance of the test leads
and internal resistance of the current connection as it
is in series with the test circuit.
The above measuring configuration is used to measure
the voltage present on the resistance under test and the
current through the resistance under test when using
the DCI/DCV or ACI/ACV dual measurement
function.
When dual measurement (DCI/DCV or ACI/ACV) is
underway, the input impedance will change, thus
resulting in load deviation due to the fluctuation of
different measuring range.
To Next Page
Loading...
