ADVANCED MEASUREMENT
81
Manually set
the reference
value
To set the reference (REL) value manually,
press the Shift key followed by the REL key.
The setting appears.
First use function keys to decide unit value.
Then use the Left/Right arrow keys to move
cursor and scroll the Knob key or press
Number keys to enter the desired value.
Press the F6 (Enter) key or the Knob key
until click to confirm the relative value
setting.
Deactivate
Relative
measurement
To cancel the Relative measurement, press
the REL key again, or simply activate
another measurement.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
