GW Instek GPP-2323 - Page 151

REMOTE CONTROL
151
Command
:MONItor[1|2|3|4]:VOLTage[:VALue]?
Function
Queries the voltage monitor value of monitor
(active channel).
Example
:MONItor2:VOLTage?
Queries the CH2voltage monitor value for the
current monitor.
Command
:RECOrder[1|2|3|4]:PATH?
Function
Queries the save location of recorded file.
Example
:RECOrder2:PATH?
Queries the save location of recorded file for CH2.
Command
:RECOrder[1|2|3|4]:MEMory{0|1|2|3|4|5|6|7|8|9}
Function
Save the recorded file to the internal storage with
specified saving location.
Description
{0|1|2|3|4|5|6|7|8|9} represent individually 10
saving locations of recorded file within internal
storage.
Example
:RECOrder2:MEMory 5
Save the CH2 recorded file to the saving location of
recorded file within the internal storage 5.
Command
: RECOrder[1|2|3|4] :USB <dest>
Function
Save the recorded file to the specified location
within the external storage.
Description
<dest> represents the specified location within the
external storage with specific formate
usb:\<name>.CSV. The length is limited within 8
characters. Filename comes with. CSV in the end of
surffix, which can be omitted.