GW Instek GPP-2323 - Page 165

REMOTE CONTROL
165
Function
Saves the channel sequence output file to the
designated location of internal storage.
{0|1|2|3|4|5|6|7|8|9} represent the storage
locations of 10 files within the internal storage
individually.
Example
:SEQUence2:MEMory:SAVE 1
Saves the CH2 sequence output file to the
SEQUENCE01 location of internal storage.
Command
:SEQUence[1|2]:MEMory:LOAD
{0|1|2|3|4|5|6|7|8|9}
Function
Recalls the channel sequence output file saved in
the designated location from internal storage.
{0|1|2|3|4|5|6|7|8|9} represent the storage
locations of 10 files within the internal storage
individually.
Example
:SEQUence2:MEMory:LOAD 1
Recalls the CH2 sequence output file of
SEQUENCE01 saved in the internal storage.
Command
:SEQUence[1|2]:USB:SAVE <dest>
Function
Saves the channel sequence output file to the
designated location of external storage. <dest>
indicates the designated location of external
storage with file format in either
usb:\<name>.CSV or usb:\<name>.SEQ. The file
name spans up to the max. 8 alphanumeric
characters. .CSV/.SEQ represents the suffix of
sequence output file name. Storage location can
not be designated when sequence function is
enabled.
Example
:SEQUence2:USB:SAVE USB:\R001.CSV
Saves the CH2 sequence output file, by the name
of ”R001.CSV”, to the external storage.