GW Instek GPP-2323 - Page 183

REMOTE CONTROL
183
Example
:SYSTem:COMM:LAN:SMAS 255.255.255.0
Sets the subnet mask to 255.255.255.0.
Command
:SYSTem:COMMunicate:LAN:SMASk?
Function
Query the subnet mask.
Example
:SYSTem:COMMunicate:LAN:SMASk?
Query the subnet mask.
Command
:SYSTem:COMMunicate:LAN:GATEway
<IPaddress>
Function
Sets the gateway IP address.
Description
<IP address>
ASCII string, within the range of
1.0.0.0 to 223.255.255.255
(excluding 127.nnn.nnn.nnn).
The SYSTem:COMMunicate:LAN:APPLy
command needs to be executed before the gateway
IP address setting can take effect.
Example
:SYSTem:COMMunicate:LAN:GATEway 172.16.3.1
Sets the gateway IP to 172.16.3.1.
Command
:SYSTem:COMMunicate:LAN:GATEway?
Function
Queries the gateway IP.
Example
:SYSTem:COMMunicate:LAN:GATEway?
Queries the gateway IP.
Command
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
<b>
Function
Allow the IP address to be set manually.
<b>
0/OFF: disable the manual IP address.
1/ON: enable the manual IP address.