Setup
41
Rack mounting assembly
1. Rack
mounting layout
Confirm the rack mount layout. Make sure there
is a space between each PSH. Below is the
example of rack mounting layout.
2. Decoration
board assembly
Once the layout is fixed, screw the decoration
boards to the front panel using M3 screws.
3. Binding plate
assembly
Take off two M3 screws from PSH side panels,
front and rear. Hold the binding plate between
PSH and drive the same screws in.
PSH User Manual
42
4. Main bracket
assembly
Fix the PSH to the main bracket using M3
screws.
Fix the front panel and the handle to the main
bracket using M4 screws.
To Next Page
Loading...
