GW Instek PSU 300-5 - Normal Function Settings

REMOTE CONTROL
101
MIN
Minimum internal resistance in ohms
MAX
Maximum internal resistance in ohms
Return parameter
<NR2>
Returns the internal resistance in ohms.
Example
SOUR:RES:LEV:IMM:AMPL 0.1
Sets the internal resistance to 100mΩ.
[:SOURce]:VOLTage[:LEVel][:IMMediate]
[:AMPLitude]
Set
Query
Description
Sets or queries the voltage level in volts.
Syntax
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
{<NR2>(V)|MINimum|MAXimum}
Query Syntax
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Parameter
<NRf>
0~105% of the rated output voltage in
volts.
MIN
Minimum voltage level
MAX
Maximum voltage level
Return parameter
<NR2>
Returns the voltage level in volts
Example
SOUR:VOLT:LEV:IMM:AMPL 10
Sets the voltage level to 10 volts.
[:SOURce]:VOLTage[:LEVel]:TRIGgered
[:AMPLitude]
Set
Query
Description
Sets or queries the voltage level in volts when a
software trigger has been generated.
Syntax
[:SOURce]:VOLTage[:LEVel]:TRIGgered[:AMPLitude]
{<NR2>(V)|MINimum|MAXimum}
Query Syntax
[:SOURce]:VOLTage[:LEVel]:TRIGgered[:AMPLitude]?
Parameter
<NR2>
0%~105% of the rated voltage output in
volts.