GW Instek PSU 300-5 - External Control of Output

PSU Series Programming Manual
130
Trigger Commands
:TRIGger:OUTPut:SOURce .......................................................... 130
:TRIGger:OUTPut[:IMMediate] ................................................... 130
:TRIGger[:TRANsient]:SOURce .................................................. 131
:TRIGger[:TRANsient][:IMMediate] ............................................ 131
:TRIGger:OUTPut:SOURce
Set
Query
Description
Sets or queries the trigger source of the output
trigger.
Syntax
:TRIGger:OUTPut:SOURce
{BUS|IMMediate|EXTernal}
Query Syntax
:TRIGger:OUTPut:SOURce?
Parameter/
Return parameter
BUS
Output trigger is generated by the
bus.
IMMediate
Output trigger is immediately
generated.
EXTernal
The output trigger is generated when
an external signal triggers it.
Example
:TRIGger:OUTPut:SOURce?
EXT
Sets the output trigger source to EXT.
:TRIGger:OUTPut[:IMMediate]
Set
Description
Generates an immediate trigger for the output
trigger system.
Syntax
:TRIGger:OUTPut[:IMMediate]
Example
:TRIG:OUTP
Example
:TRIG:MEM