GW Instek PSU 300-5 - System:error:enable; System:keylock:mode; System:language:emulation; System:language:[:Select]

PSU Series Programming Manual
128
Return parameter
<bool>
Returns the key lock status.
:SYSTem:KEYLock:MODE
Set
Query
Description
Sets or queries the keylock mode. This setting is
the equivalent to the F-19 function setting.
Syntax
Query Syntax
:SYSTem:KEYLock {<bool>|OFF|ON}
:SYSTem:KEYLock?
Parameter/Return
parameter
0 | OFF
Panel lock: allow output off.
1 | ON
Panel lock: allow output on/off.
:SYSTem:ERRor:ENABle
Set
Query
Description
Clears the Error Queue and enables all error
messages to be placed in the System Error Queue.
Syntax
:SYSTem:ERRor:ENABle
:SYSTem:LANGuage:EMULation
Set
Query
Description
Sets or queries the command language.
Syntax
Query Syntax
:SYSTem:LANGuage:EMULation
{“NONE”|”N5700”|”GENSYS”|”PWX”}
:SYSTem:LANGuage:EMULation?
Parameter/
Return parameter
“NONE”
Emulation is not used. This is the
default setting
“N5700”
N5700/N8700 emulation is used.
“GENSYS”
GENESYS emulation is used.
“PWX”
PAG emulation is used.
:SYSTem:LANGuage:[:SELect]
Set
Query
Description
Sets or queries the command language.